superyong
06-06-2007, 02:31 AM
So here is how I do my perlite humidification setup.
I put a load of perlite in a chip pan, soak that in the sink, let it drain for about a minute, dump it in the tray.
I have tried this several times. For the first 12 hours or so it's more than perfect. You cannot even see into the gorwing chamber because the condensation is so thick.
But then it slowly fades. The walls lose the condensation one by one until I ma left with nothing.
The perlite is still damp when this happens.
Any ideas what could be wrong?
I put a load of perlite in a chip pan, soak that in the sink, let it drain for about a minute, dump it in the tray.
I have tried this several times. For the first 12 hours or so it's more than perfect. You cannot even see into the gorwing chamber because the condensation is so thick.
But then it slowly fades. The walls lose the condensation one by one until I ma left with nothing.
The perlite is still damp when this happens.
Any ideas what could be wrong?